Campbell Bay | August 28, 2026
Papa Rao
An STS bus travelling from Campbell Bay to Joginder Nagar in Great Nicobar went off the road after its brakes reportedly failed during the early hours of Friday. The incident occurred around 5 kilometres from Zero Point along the North-South Road.
The bus was reportedly on its 5:45 am trip from Campbell Bay to Joginder Nagar when the driver realised that the brakes had failed well before the accident spot. He immediately alerted the conductor and the two passengers travelling on the bus and asked them to brace themselves.
The bus descended the slope and struck the guard rails of a culvert before leaving the culvert and entering the forested area just beyond the road berm, where it eventually came to a halt.
No major injuries have been reported among the staff or passengers, although all four occupants of the bus reportedly sustained minor injuries. The bus was carrying only two passengers at the time of the incident, and the situation was reportedly handled well by the driver.
The stretch where the incident occurred is considered a challenging section of the road, as it passes through a valley with the road descending from both sides.
The incident has once again highlighted the importance of regular mechanical inspections and preventive maintenance of STS buses, particularly those operating in remote areas. Thorough checks before buses are pressed into service can help identify mechanical problems and reduce the risk of accidents.
There is also a need for adequate availability of buses at remote STS units such as Great Nicobar, which would provide greater scope for regular servicing and maintenance of vehicles operating on public routes.
While the injuries reported in the latest incident are understood to be minor, the accident underscores the importance of ensuring the roadworthiness and safety of public transport buses operating across the islands. Recent STS bus accidents in other parts of the islands have resulted in passengers sustaining major injuries, making regular inspection and preventive maintenance especially important.
